Accessories

 

Support plate Pancake tray

A support for Pancake 1 and 2 trays where the distance between the mountings on the heat pump is too large …

Brackets for PRO series

Universal brackets for ground stands, only for PRO 630, 930 and 1230 trays.

Hose adapter Gray

Gray adapter, for hose Ø18-20mm, with inlet for heating cable. For top feed of heating cable.

Ø25 Insulated hose

Insulated beige hose, interior Ø25mm, exterior Ø37mm, for PRO 630, 930 and 1230 heated tray.

Hose adapter with leaf basket

Adapter, with leaf basket for hose Ø20 and 25mm, with side/under feed for heating cable.

Pancake 2 support plates

A plate that is used if the outdoor unit is extra wide between mounting points.

Brackets for PRO 791 tray

Universal brackets for PRO 791 draining tray. Hot galvanized steel.

Hose adapter White

White adapter, for hose Ø18-20mm, with inlet for heating cable. For top feed of heating cable.

Ø19 Insulated hose

Insulated gray hose, interior Ø19mm, exterior Ø31mm, for drainage kit and drainage tray.

Hose adapter Ø20/21mm

Hose adapter, for connection between outlet on outdoor unit and hose. Outlet exterior Ø20/21, hose connection Ø20/25mm.

Well plates

A set of plates to increase the depth of the Pancake trays.

Hose mounting

Hose strap for wall and base mounting of our hoses. Fits all ClimaLine hoses.

Pipe & Hose mountings, Ø32

Mounting for use with condensation pipes, exterior Ø32mm and insulated hose, interior Ø25mm.

Locking clamp, Ø28-32mm

Double locking clamp for insulated hose with interior dimensions Ø25mm, galvanized.

Hose adapter Ø25/26mm

Hose adapter, for connection between outlet on outdoor unit and hose. Outlet exterior Ø25/26, hose connector Ø20/25mm.

Consoles for Pancake

Universal bracket for mounting Pancake & PRO 777, 791 and 888 trays.

Cable mounting

Cable clamps in gray plastic for attaching cables. Also fits thermostat casings.

Ø20 hose, without insulation

Drainage hose white, interior Ø20mm, exterior Ø24mm, for unheated drainage kit and tray.

Locking clamps Ø22-26mm

Double locking clamp for insulated hose, interior Ø19mm and hose interior Ø20mm, galvanized.

Hose adapter Ø32/33mm

Hose adapter, for connection between outlet on outdoor unit and hose. Outlet exterior Ø32/33, hose connection Ø20/25mm.

Söker du vår webshop?

Är du återförsäljare eller installatör och söker vår webshop?
Den finner du om du knappar in dig på www.climaco.se

Till vår webshop